flash rb3 image promt error ,reboot int ,enter fastboot mode



  • the log about bootloader as below ,how can I address the issue?
    Cmdline: console=ttyMSM0,115200n8 earlycon=msm_geni_serial,0xA84000 androidboot.hardware=qcom androidboot.console=ttyMSM0 video=vfb:640x400,bpp=32,memsize=3072000 msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 service_locator.enable=1 an
    BootLinux: failed to get dtbo image
    DTB offset is incorrect, kernel image does not have appended DTB
    Launching fastboot
    Fastboot Build Info: Feb 22 2019 11:24:13
    qusb2_1: hstx: 6
    PLL1 locked: 5



  • I can make it work again by using QDL



  • I got similar issue, but even worse, it cannot even get into fastboot mode

    boot log:

    S - QC_IMAGE_VERSION_STRING=BOOT.XF.2.0-00371-SDM845LZB-1
    S - IMAGE_VARIANT_STRING=SDM845LA
    S - OEM_IMAGE_VERSION_STRING=TSBJ-FA-PC-02170
    S - Boot Interface: UFS
    S - Secure Boot: Off
    S - Boot Config @ 0x00786070 = 0x000000c1
    S - JTAG ID @ 0x00786130 = 0x2008e0e1
    S - OEM ID @ 0x00786138 = 0x00000000
    S - Serial Number @ 0x00784138 = 0xda8de9d5
    S - OEM Config Row 0 @ 0x00784188 = 0x0000000400000000
    S - OEM Config Row 1 @ 0x00784190 = 0x0000000000000000
    S - Feature Config Row 0 @ 0x007841a0 = 0x0050200080000400
    S - Feature Config Row 1 @ 0x007841a8 = 0xe000ffff00007fff
    S - Core 0 Frequency, 1516 MHz
    S - PBL Patch Ver: 1
    S - PBL freq: 600 MHZ
    B -        94 - PBL, Start
    B -      5277 - bootable_media_detect_entry
    B -     44022 - bootable_media_detect_success
    B -     44396 - elf_loader_entry
    B -     45006 - auth_hash_seg_entry
    B -     45205 - auth_hash_seg_exit
    B -     51177 - elf_segs_hash_verify_entry
    B -     57917 - elf_segs_hash_verify_exit
    B -     58545 - auth_xbl_sec_hash_seg_entry
    B -     65918 - auth_xbl_sec_hash_seg_exit
    B -     65919 - xbl_sec_segs_hash_verify_entry
    B -     66676 - xbl_sec_segs_hash_verify_exit
    B -     66703 - PBL, End
    B -     81923 - SBL1, Start
    B -    204655 - boot_flash_init, Start
    D -        30 - boot_flash_init, Delta
    B -    208620 - xblconfig_init, Start
    D -       488 - Auth Metadata
    D -    124257 - xblconfig_init, Delta
    B -    337879 - sbl1_ddr_set_default_params, Start
    D -      1525 - sbl1_ddr_set_default_params, Delta
    B -    345870 - boot_config_data_table_init, Start
    B -    350506 - CDT not programmed, using default
    D -      4544 - boot_config_data_table_init, Delta - (54 Bytes)
        B -    365024 - CDT Version:3,Platform ID:8,Major ID:1,Minor ID:0,Subtype:0
        B -    370727 - pm_device_init, Start
        B -   1450336 - PM: PON REASON: PM0=0x400008000000040:0x0 PM1=0x400008000000020:0x0 PM2=0x400008000000020:0x0
        B -   1510390 - PM: SET_VAL:Skip
        D -   1140212 - pm_device_init, Delta
        B -   1513379 - pm_driver_init, Start
        D -      5337 - pm_driver_init, Delta
        B -   1522255 - PM: Trigger FG IMA Reset
        B -   1525793 - PM: Trigger FG IMA Reset.Completed
        B -   1534973 - PM: EntryVbat: 4230; EntrySOC: -1
        B -   1535004 - PM: ADSP result: 8
        B -   1539487 - PM: APSD in progress
        B -   1542690 - PM: BATT TEMP: 25 DegC
        B -   1546167 - vsense_init, Start
        D -         0 - vsense_init, Delta
        B -   1581760 - sbl1_ddr_set_params, Start
        B -   1583590 - Pre_DDR_clock_init, Start
        D -        91 - Pre_DDR_clock_init, Delta
        D -      7686 - sbl1_ddr_set_params, Delta
        B -   1593167 - sbl1_ddr_init, Start
        D -     16104 - sbl1_ddr_init, Delta
        B -   1613175 - DSF version = 253.10, DSF SHRM version = 173.3
        B -   1616500 - Manufacturer ID = 1, Device Type = 7
        B -   1622112 - Rank 0 size = 4096 MB, Rank 1 size = 0 MB
        B -   1627053 - do_ddr_training, Start
        B -   1633641 - Frequency = 1355 MHz
        D -      3599 - do_ddr_training, Delta
        B -   1642120 - pImem Init Start
        D -      9729 - pImem Init End, Delta
        B -   1653710 - clock_init, Start
        D -       213 - clock_init, Delta
        B -   1658742 - Image Load, Start
        D -      2898 - APDP Image Loaded, Delta - (0 Bytes)
        B -   1664812 - usb: UFS Serial - 3911f81c
        B -   1669478 - usb: fedl, vbus_low
        B -   1673840 - PM: 0: PON=0x40:CBLPWR_N: ON=0x80:PON_SEQ: OFF=0x4:RAW_XVDD_SHD
        B -   1682197 - PM: 1: PON=0x20:PON1: ON=0x80:PON_SEQ: OFF=0x4:RAW_XVDD_SHD
        B -   1689303 - PM: 2: PON=0x20:PON1: ON=0x80:PON_SEQ: OFF=0x4:RAW_XVDD_SHD
        B -   1696013 - PM: SMEM Chgr Info Write Success
        B -   1702205 - Image Load, Start
        D -       427 - Auth Metadata
        D -     10095 - Segments hash check
        D -     19611 - AOP Image Loaded, Delta - (178816 Bytes)
        B -   1725080 - Image Load, Start
        B -   1730448 - Error code 1000065 at boot_elf_loader.c Line 1501
    


  • Hi mistry,

    We will update the platform image, you can update it with QFIL&TFlash.



  • Got the same results with the latest image on Thundercomm website.

    VB: DeviceInit: Device is unlocked! Skipping verification!
    VB: LoadImageAndAuthForLE complete!
    No Ffbm cookie found, ignore: Not Found
    Memory Base Address: 0x80000000
    Decompressing kernel image start: 3203 ms
    Decompressing kernel image done: 3531 ms
    Cmdline: console=ttyMSM0,115200n8 earlycon=msm_geni_serial,0xA84000 androidboot. hardware=qcom androidboot.console=ttyMSM0 video=vfb:640x400,bpp=32,memsize=30720 00 msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 service_loca tor.enable=1 an
    BootLinux: failed to get dtbo image
    DTB offset is incorrect, kernel image does not have appended DTB
    Launching fastboot
    Fastboot Build Info: Aug 6 2019 11:20:06
    qusb2_1: hstx: 6
    PLL1 locked: 5
    usb_lane: 0
    Fastboot: Initializing...
    Fastboot: Processing commands



  • Seems i am stuck with the same error.
    the board is stuck in fastboot mode.

    The switch setting is "0 1 1 0 0 1" (USB-C power on, USB debug)
    power ON the board. Both DC power and USB-C are connected.
    ON the USB debug port, I get the following message.

    Memory Base Address: 0x80000000
    Decompressing kernel image start: 3174 ms
    Decompressing kernel image done: 3502 ms
    Cmdline: console=ttyMSM0,115200n8 earlycon=msm_geni_serial,0xA84000 androidboot.hardware=qcom androidboot.console=ttyMSM0 video=vfb:640x400,bpp=32,memsize=3072000 msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 service_locator.enable=1 an
    BootLinux: failed to get dtbo image
    DTB offset is incorrect, kernel image does not have appended DTB
    Launching fastboot
    Fastboot Build Info: Feb 22 2019 11:24:13
    qusb2_1: hstx: 6
    PLL1 locked: 5
    usb_lane: 0
    Fastboot: Initializing...
    Fastboot: Processing commands

    I can use fastboot to flash the image again.
    The image flashing goes ok, but the device still stays in fastboot mode.
    Please Help



  • Hi Junwwu,

    Can you give me a complete operating procedure?
    Where is your image coming from, the above version?


 

Copyright © 2019. Thundercomm | Record license ICP No. 16006224 All rights reserved.